LiL'G
(LiL G the beatmaker)
Registered Users
Posts:40
 | | 05/18/2008 9:03 AM |
| | very good tutorial | | | |
|
Low Down Productions
(C-LoC)
Registered Users
Posts:45
| | 05/18/2008 6:53 PM |
| thanx alot...C-LoC | | | |
|
szaszhareen
(szaszhareen)
Registered Users
Posts:2
| | 05/21/2008 2:18 PM |
| | quick question: i tried to drag 3xosc into the step sequencer, but i cant do that because it is a folder, not a patch. which patch in 3xosc did you use as the bass boost? or am i missing somethingg here? | | | |
|
GP Studio
(brolance)
Moderators
Posts:1389
| | 05/22/2008 7:00 AM |
| | you can also just go to channels / add one / 3xosc from the top menu, i just used the default patch for the 3xosc the one that loads when you add it from the channels menu then i put the note in a very low octave, try to find a note that matches your beat pitch then transpose the note down several octaves, remember too this is just a hack, i havent found a real need for this yet, but was offering it as a response to another youtube vid where this was done in pro tools. | |
GPSTudio | http://gpstudio.us | FlStudio 8, Cubase Studio 4.1, Fostex Pm4, Rokit Krk5's, Rokit Krk10 sub, Axiom 49, Keystation 49, Tascam US 122l, Toshiba Satellite Laptop 1.86ghz 1gig ram 100gig hd, 300gig ext hd | |
|
jthescruff
(jthescruff)
Registered Users
Posts:1
| | 06/04/2008 4:53 AM |
| | Really useful thanks! :) | | | |
|
chrisp200
(chrisp200)
Registered Users
Posts:2
| | 06/10/2008 9:05 PM |
| I must be dumb? when I did this the OxOsc just played a sustained bass sound the whole, wether the kick hit or not. What did I do wrong? | | | |
|
GP Studio
(brolance)
Moderators
Posts:1389
| | 06/11/2008 10:00 AM |
| | sounds like you messed up somewhere in the linking process, is the volume knob on the 3xosc moving back and forth? | |
GPSTudio | http://gpstudio.us | FlStudio 8, Cubase Studio 4.1, Fostex Pm4, Rokit Krk5's, Rokit Krk10 sub, Axiom 49, Keystation 49, Tascam US 122l, Toshiba Satellite Laptop 1.86ghz 1gig ram 100gig hd, 300gig ext hd | |
|
chrisp200
(chrisp200)
Registered Users
Posts:2
| | 06/11/2008 5:09 PM |
| | yes the volume knob is moving. I think I figured it out. Could it just be that I didnt have a low enough note in the piano roll? how low do you usually go? | | | |
|
GP Studio
(brolance)
Moderators
Posts:1389
| | 06/12/2008 7:48 AM |
| | Well this is just a hack and not really a necessary thing to do on most beats, so i truthfully havent found a need for it yet. I would suggest putting the note around 2 octaves lower than the key of your song. If your not getting enough volume from the 3xOsc you can adjust the volume from the MISC tab on the 3xOsc channel | |
GPSTudio | http://gpstudio.us | FlStudio 8, Cubase Studio 4.1, Fostex Pm4, Rokit Krk5's, Rokit Krk10 sub, Axiom 49, Keystation 49, Tascam US 122l, Toshiba Satellite Laptop 1.86ghz 1gig ram 100gig hd, 300gig ext hd | |
|
intrac3able
(rgranhol4444)
Registered Users
Posts:6
| | 07/15/2008 1:57 PM |
| Hey, I did everything on this tutorial (to help me learn), but when the kick drum hits, only the 3x osc plays, and not the drum! I don't think it's on mute..is this a common problem? Could somebody give some suggestions? | | | |
|
intrac3able
(rgranhol4444)
Registered Users
Posts:6
| | 07/15/2008 1:57 PM |
| Hey, I did everything on this tutorial (to help me learn), but when the kick drum hits, only the 3x osc plays, and not the drum! I don't think it's on mute..is this a common problem? Could somebody give some suggestions? | | | |
|
GP Studio
(brolance)
Moderators
Posts:1389
| | 07/16/2008 6:16 AM |
| | Yeah the peak controller has a mute button at the bottom right click it and your golden! | |
GPSTudio | http://gpstudio.us | FlStudio 8, Cubase Studio 4.1, Fostex Pm4, Rokit Krk5's, Rokit Krk10 sub, Axiom 49, Keystation 49, Tascam US 122l, Toshiba Satellite Laptop 1.86ghz 1gig ram 100gig hd, 300gig ext hd | |
|
intrac3able
(rgranhol4444)
Registered Users
Posts:6
| | 07/16/2008 12:18 PM |
| | oh thankks haha, i was looking all over for a mute button! | | | |
|
intrac3able
(rgranhol4444)
Registered Users
Posts:6
| | 07/16/2008 4:31 PM |
| | hey i have another question :S its not really related but i didnt know where to post it..so, im new to this whole thing, and i recently got a package witha bunch of kicks (a .rar file), and i unzipped it fine, but i cant seem to import wave files into fl studio..am i doing it wrong or what? any info on importing and all that would be GREATLY apreciated, thankss! | | | |
|
Technical
(Kweku)
Registered Users
Posts:1
| | 07/24/2008 10:04 AM |
| Thanx a mil.. | | | |
|
DjXplicit
(tamir102)
Registered Users
Posts:7
| | 08/04/2008 6:52 PM |
| | interesting thanks.. | | | |
|
thomasman
(thomasmang)
Registered Users
Posts:7
| | 08/07/2008 6:04 PM |
| | cool tut even tho i really don't know what it all does. but i'll still use it for my beats! lol | |
http://www.myspace.com/thethomasman | |
|
Xaiolin
(Xaiolin)
Registered Users
Posts:6
| | 08/09/2008 6:42 AM |
| Everytime I try to open the peak controller it says that its not a generator and cant be used as a channel. | | | |
|
GP Studio
(brolance)
Moderators
Posts:1389
| | 08/10/2008 9:09 AM |
| | You load the peak controller into a mixer track not an instrument channel. Open the mixer then add it as an effect in the mixer. | |
GPSTudio | http://gpstudio.us | FlStudio 8, Cubase Studio 4.1, Fostex Pm4, Rokit Krk5's, Rokit Krk10 sub, Axiom 49, Keystation 49, Tascam US 122l, Toshiba Satellite Laptop 1.86ghz 1gig ram 100gig hd, 300gig ext hd | |
|
Divine
(Divine)
Registered Users
Posts:6
| | 09/18/2008 8:03 PM |
| I just boost the kick, but the sample has to sound clean
www.mybeatshop.com/nycebeatz
www.myspace.com/nycebeatz2008 | | | |
|